Sharp MZ

It's the same as mine. You have a choice: just remove it or replace it with an equivalent one. It is not necessary as it was just here as a filter which "cleans" the frequencies interferences especially with old CRTs around (so your neighbours may watch their TV set). Nowadays, it is almos...

Is that a X2 ?

I had this issue (it is not necessary to work but I dedided to replace while I could only remove it).

https://forum.system-cfg.com/viewtopic. ... 99#p133548 (french language).

As a side note: the LCD seems to be too hungry, I need to plug USB power to provide enough current.

Here is my video showing my MZ-SD²CMT loading BASIC 1Z-013B in ultra-fast mode. I navigate to 1Z-013B, press RIGHT button to activate ULTRA-FAST mode, then SELECT button to launch loading. After 14s, BASIC runs. https://youtu.be/KOKyJIB4FTE Some pictures show how wires are connected: IMG_20181209_23...

This is the CYAN line (3 - PE5/INT5/OC3C -> READ)

tingo wrote: ↑Sat Dec 08, 2018 1:59 pm I used 1Z-013B.mzf as a test file

Huh? Where are you trying to load the monitor program in .mzf file? At which address? The monitor in ROM cannot load a program at a load address lesser than $1200: it is forbidden by the monitor.

EDIT: Ah yes! the 1Z-013B is the BASIC, nevermind !

The source is working. The README.md is not updated. You need pin #3 because I use it to emit a one-shot pulse (PWM).

Cool! Is the project source available? I'm totally interested in your browser to make a version for MZ-SD²CMT without GUI with all the credits to you for this part. For the entry order issue, there are some PC softwares which can reorder physically the entries in the alphabetical order. I don't know...

UncleBod wrote: ↑Thu Dec 06, 2018 3:28 pm What about a composite video to HDMI converter?
It seems that the price is not to high, and no changes needed to be done to the computer.

/UncleBod

Not a good idea, composite is very ugly on a HDMI.

https://www.retrogamingcables.co.uk/GBS-8200-RGBS-COMPONENT-TO-VGA-CONVERTER You can see pins R, G, B, GND and S: you can connect then to the R, G, B, VIDEO and GND of MZ-700: GBS-8200-RGBS-VGA-converter-input.JPG This card has several connectors you can use. If you want HDMI, there is a way: SCART>...