Anything that does not belong in the above categories.
Posts: 19
Joined: Wed Feb 07, 2018 4:41 pm

Re: Introduction

Post by sharpmz » Wed Feb 21, 2018 5:07 pm

hlide wrote:
Tue Feb 20, 2018 9:56 am
Well, if their text can be retrieved by a tool, I could have them translated with a translator then correct them.
I've sent them back to the owner.

Posts: 19
Joined: Thu Mar 22, 2018 3:53 pm
Location: Poland

Re: Introduction

Post by Gortho » Fri Apr 20, 2018 1:01 pm

So time for me, eh?

- male
- 1974
- Poland

My first ever computer was MZ-731 with just a few programs and games included... Maybe that was the reason I got into programming. Could not play anything unless I wrote it myself ;) Started with BASIC, then learned assembly basics from the sharp manual by reading monitor listing :D

Lots of fun. Unfortunately long time ago I got rid of my old sharp. Then recently i decided to bring back some nostalgia and bought MZ-821. It was in a bit miserable state, but after some cleaning and soldering everything seems to be in perfect order.

User avatar
Posts: 95
Joined: Mon Feb 05, 2018 2:59 pm

Re: Introduction

Post by Pacman » Sun Apr 22, 2018 3:32 pm

Hi everybody!

- male too
- 1969
- South West of France
- The MZ-721 was my first computer in the summer of 1984

I discovered the computer the previous year thanks to the college that had MO5 nano-network.
I have developed a lot of programs for the MZ-721 including some games like Catacombes (Sharp Basic), or Catacombes+ (Kuma Compiler) that have been on the site for about ten years now.
Currently I develop a software that can translate wav format tapes to mzf type files to recover all my programs directly without going through my MZ-721.
I am currently finalizing an MZ-700 emulator under Lazarus: the 1Z-013B monitor, the PCG-700, the sharp Basic, the kuma basic, the kuma compiler, and practically all the games I've been able to recover are working.
Finally, I have a digital interface project between a PC connected USB and a Sharp MZ-700 to exchange two-way data.


Posts: 1
Joined: Tue Nov 13, 2018 1:07 pm

Re: Introduction

Post by MZnewbie » Sat Nov 17, 2018 11:57 am


- male
- 1968
- Wales

Dragon 64 was my first computer at the end of 1983, but I really wanted an MZ-700 that I had seen in a small computer shop window (I think it was an MZ-731) but never bought one in the end. Fast forward to the end of 2018 and I have finally got an MZ-700 of my own (a 711 that has the cassette and plotter upgrades) It is supposed to be in working order, but I haven't powered it up yet until I re-cap the boards especially the power board. So thank you for the tips and info that I have already gleaned from this site and I look forward (or is it backwards?) to using the computer that I wanted all those years ago.

User avatar
Posts: 174
Joined: Thu Jan 25, 2018 10:46 am
Location: Devon, UK

Re: Introduction

Post by mz-80a » Sun Nov 18, 2018 9:33 am

Welcome :)
MZ-80A Secrets

Sharpworks (Sharp MZ homebrew)

User avatar
Posts: 13
Joined: Tue Dec 04, 2018 7:18 am

Re: Introduction

Post by dat-alex » Tue Dec 04, 2018 11:40 am



my first computer was (is) Commdore 64
recentrly bacame a proud owner of an MZ80K and trying all kind of DIY projects with it!

Posts: 22
Joined: Tue Feb 05, 2019 10:11 am

Re: Introduction

Post by CRG » Thu Feb 07, 2019 8:50 am

Hello all.

I've recently picked up a sharp mz-700 from ebay sold as spares repair and I'm looking forward to getting it back up and running. The machine is still in transit to me but I know it needs some work as 2 buttons are missing on the keyboard so I'll be looking to source those or an alternative button that suits. I'm hoping the not working state will be down to a faulty PSU (bad caps seem like a common problem) and I'm expecting the tape drive will need some maintenance. Once I get this wee machine up and running I'm looking forward to experiencing some of the software on offer.

So anyway my name is Glen I'm 37 years old (38 next Friday actually) and I'm a bit of a collector (boarding on hoarder lol) of retro consoles and computers but this is my first leap into the sharp mz range so I'm looking forward to getting started.

See you in the forums.

Posts: 1
Joined: Thu Nov 21, 2019 10:12 am

Re: Introduction

Post by psmart » Wed Nov 27, 2019 11:34 am

Hello All,

Just an introduction and to be honest I was quite shocked at the number of people still using the Sharp machines!

Regarding myself, too old to mention but still 15+ years from retirement!!!, my first Sharp was the MZ80A which my older brother bought and it ended up being given to me, then at University I 'upgraded' to the MZ700. They both taught me a lot about programming and electronics which have helped me a lot over the years.

I have in my collection an MZ80A, an MZ700 and an MZ800 and an MZ-700 which I fried (like an idiot, the PSU on this machine went pop so I thought I would temporarily use a PC power supply and without thinking, yellow being the standard for 12V, connected. the 12V PC PSU lines and switched on - nice way to have home made silicon chips!!!). I thus ripped out the motherboard and wired in my own design based on an Emulator Im working on!

I have four MZ related projects going on at the moment, a Rom Filing System board+software the MZ80A, a 40/80 Column colour board for the MZ80A , a CPU replacement I like to deem a tranZPUter initially for the MZ80A and the SharpMZ Hardware Emulation .
These are all free-time projects which Im doing for the love of Sharp's (and self learning) and would be happy to provide the PCB's etc f.o.c. as and when I have them for other enthusiasts. The RFS and the 40/80 board's I made all have flaws which I modded but I will soon be making another batch and at US$5 for 10 pieces from China for the PCB, I will have at least 8 in a batch going free.

Although not a big forum user (or social media for that matter), I hope to do my bit with respect to keeping the Sharp alive.

Posts: 319
Joined: Thu Jan 25, 2018 9:31 pm

Re: Introduction

Post by hlide » Wed Nov 27, 2019 12:34 pm

Welcome psmart! your hardware mods are very interesting.

Post Reply