SHARP MZ-2800/MZ-5500/MZ-6500 software

AnnaWu
Posts: 13
Joined: Thu Nov 15, 2018 9:58 am

SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by AnnaWu » Fri Dec 13, 2019 10:52 am

Interest on MZ-2800/MZ-5500/MZ-6500 software?

hlide
Posts: 480
Joined: Thu Jan 25, 2018 9:31 pm

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by hlide » Fri Dec 13, 2019 1:33 pm

I believe Vaclav Peroutka has an MZ-6550 and he may be interested. But I don't know if he is registred here.

AnnaWu
Posts: 13
Joined: Thu Nov 15, 2018 9:58 am

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by AnnaWu » Tue Dec 17, 2019 7:47 am

"I believe Vaclav Peroutka has an MZ-6550 and he may be interested. But I don't know if he is registred here."

I got the MZ-6550 Bios ROM but a suitable emulator + software is still missing and not compatible with MZ-6500.

hlide
Posts: 480
Joined: Thu Jan 25, 2018 9:31 pm

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by hlide » Tue Dec 17, 2019 12:45 pm

It looks as if you have the same issue except for him having a true MZ-6550. EmuZ-6550 is not good? He also thinks he has an issue with MZ-6550 FDD. Ok, I guess anything relative to MZ-6550 appear to be dead.

AnnaWu
Posts: 13
Joined: Thu Nov 15, 2018 9:58 am

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by AnnaWu » Wed Dec 18, 2019 7:35 am

hlide wrote:
Tue Dec 17, 2019 12:45 pm
It looks as if you have the same issue except for him having a true MZ-6550. EmuZ-6550 is not good? He also thinks he has an issue with MZ-6550 FDD. Ok, I guess anything relative to MZ-6550 appear to be dead.
A EmuZ-6550 not exist. I was talking about the EmuZ-6500 (Japanese model) emulator and is working well.

hlide
Posts: 480
Joined: Thu Jan 25, 2018 9:31 pm

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by hlide » Wed Dec 18, 2019 10:24 am

In the Common Source Code Project, there is an EmuZ-6550 project. I built it under Visual Code and gave it to Vaclav.

In the change log, it is said:
Now working...
*EmuZ-6550 - SHARP MZ-6550 Emulator
[...]
Now I cannot say if it is fully working because I have no way to test it and Vaclav had issue with it.

AnnaWu
Posts: 13
Joined: Thu Nov 15, 2018 9:58 am

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by AnnaWu » Wed Dec 18, 2019 10:52 am

hlide wrote:
Wed Dec 18, 2019 10:24 am
In the Common Source Code Project, there is an EmuZ-6550 project. I built it under Visual Code and gave it to Vaclav.

In the change log, it is said:
Now working...
*EmuZ-6550 - SHARP MZ-6550 Emulator
[...]
Now I cannot say if it is fully working because I have no way to test it and Vaclav had issue with it.
Can you upload your EmuZ-6550 build?

hlide
Posts: 480
Joined: Thu Jan 25, 2018 9:31 pm

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by hlide » Wed Dec 18, 2019 12:32 pm

Beware I adapted the visual studio project to VS2019, here is the release I built:
EmuZ-6550_Release.7z
(1.46 MiB) Downloaded 114 times

AnnaWu
Posts: 13
Joined: Thu Nov 15, 2018 9:58 am

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by AnnaWu » Thu Dec 19, 2019 9:34 am

Thanks, hlide!

If you need the BIOS or software for the EmuZ-6500 (not 6550), please tell me.

hlide
Posts: 480
Joined: Thu Jan 25, 2018 9:31 pm

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by hlide » Thu Dec 19, 2019 3:38 pm

For now, I'm mostly interested in MZ-700, MZ-800, MZ-1500 and X68000 stuff.

Post Reply