MZ-700 Upgrade - tranZPUter SW-700

Post Reply
psmart
Posts: 62
Joined: Thu Nov 21, 2019 10:12 am
Location: Leeds
Contact:

MZ-700 Upgrade - tranZPUter SW-700

Post by psmart »

Just thought I would share my most recent board with the forum as I slowly piece together the documentation which can be found at https://eaw.app/sharpmz-700-upgrades-tranzputer-sw/

This is an amalgamation of my MZ-80A developments for the Sharp MZ-700 providing it with a much needed boost in terms of storage, video, speed etc. Still some work to do but in general it is a stable upgrade. All the source can be found on github at https://github.com/pdsmart/tranZPUter

As mentioned in my github website, this board hasn't been designed for commercial reasons, not least because the parts aren't the cheapest and features are not reduced to meet a price. The boards are difficult to make, at least with my limited facilities but should there be an interest I could make up the odd board at cost or enquire as to get a small run made at a PCB fab. I do have some spare PCB's so if you have the facilities to assemble your own just ask and I can send you one.
Attachments
tranZPUter-SW-700_v1_2a_TS.jpg
Post Reply