Unknown hardware for MZ 800

Post Reply
fitus
Posts: 52
Joined: Tue Jun 12, 2018 8:52 pm

Unknown hardware for MZ 800

Post by fitus »

What kind of strange box on the top of FDD is on the picture?
Attachments
Screenshot_20191116-140518.png
hlide
Posts: 508
Joined: Thu Jan 25, 2018 9:31 pm

Re: Unknown hardware for MZ 800

Post by hlide »

Can you tell the number magazine of SHARPENTIERS?
hlide
Posts: 508
Joined: Thu Jan 25, 2018 9:31 pm

Re: Unknown hardware for MZ 800

Post by hlide »

It looks like an MZ-1U06 (expansion unit). But I believe it is for MZ-700. I don't think MZ-800 need it to hold a FDD card.

https://original.sharpmz.org/usedskdrives.htm

See MZ-700 and MZ-800, they both have an MZ-1U06 above a dual FDD: http://www.idealine.info/sharpmz/sucvisit.htm
fitus
Posts: 52
Joined: Tue Jun 12, 2018 8:52 pm

Re: Unknown hardware for MZ 800

Post by fitus »

Its Sharpentiers No 14
Sharpals
Posts: 24
Joined: Sat Jul 14, 2018 5:39 am

Re: Unknown hardware for MZ 800

Post by Sharpals »

If you are uing the MZ800 FDC you dont need an expansin unit. Bur there was an expansionsunit to conect MZ700 FDC and other cards to the MZ800.

By my self, i have bulid an busadapter to conect the MZ700 FDC to the MZ800 ( you must remove the (ep)rom from the MZ700 card !! )
Post Reply