MZ-700 correct filter capacitors for PSU
Re: MZ-700 correct filter capacitors for PSU
Do not bridge the connections! Either you replace them with more modern caps like the ones in timh's last picture or you just remove the depleted ones but never ever ever connect them with conductive wires (that's what we would call a short circuit!).
- WinstonSmith
- Posts: 4
- Joined: Mon Feb 28, 2022 3:28 pm
Re: MZ-700 correct filter capacitors for PSU
I have them and the power supply is still open, so does it matter which way I orientated these capacitors because both legs are the same length?
Thanks
Winston
Thanks
Winston
Re: MZ-700 correct filter capacitors for PSU
AC capacitors have no polarization: You can connect them in the direction you want.
In general, the inscription is easily visible.
In general, the inscription is easily visible.
Re: MZ-700 correct filter capacitors for PSU
Think again. This is defense in depth. Safety capacitors are both for EMI / RFI supression, and also to ensure that equipment fails in a safe way. Don't take my word for it, look it up if you will.
--
Torfinn
Torfinn
Re: MZ-700 correct filter capacitors for PSU
I think I was clear:
We had 220V and now we have 230-240V so most of those caps will blow quickly if you persist to use the paper ones anyway. If replacing, use 270V versions.